Journal Publications

 PolymerProcessing.com logo
HOME OPERATIONS POLYMERS RESOURCES NOTES ABOUT

    PolymerProcessing.com > About > Chris Scott > Publications

  • "On Modes and Criteria of ABS Melt Failure in Extension," J.K. Lee, T.L. Virkler, and C.E. Scott, Rheol. Acta, 41, 567 (2002).
  • "Blade Geometry Effects on Chopped Glass Fiber Dispersion," M.M.H. Kuroda and C.E. Scott, Polym. Composites, 23, 828 (2002).
  • "Effects of ABS Rubber Particles on Rheology, Melt Failure and Thermoforming," J.K. Lee, T.L. Virkler, and C.E. Scott, Polym. Engr. Sci., 42, 1541 (2002).
  • "Effect of Addition Protocol on Mixing in Miscible and Immiscible Polymer Blends," H.E. Burch and C.E. Scott, Polym. Engr. Sci., 42, 1197 (2002).
  • "Initial Dispersion Mechanisms of Chopped Glass Fibers in Polystyrene," M.M.H. Kuroda and C.E. Scott, Polym. Composites, 23, 395 (2002).
  • "Morphological and Rheological Aspects of Reactive Polymer Blending," C.E. Scott and N.D.B. Lazo, in Reactive Polymer Blending, Eds. W.E. Baker, G.-H. Hu, and C.E. Scott, Hanser (2001).
  • "Miscible Poly(benzoyl paraphenylene)-Polycarbonate Blends for Improved Processing," Y.-H. Ha, C.E. Scott, and E.L. Thomas, Polymer, 42, 6463 (2001).
  • "Influence of Initial Sheet Temperature on ABS Thermoforming," J.K. Lee, T.L. Virkler, and C.E. Scott, Polym. Engr. Sci., 41, 1830 (2001).
  • "Visualization and Microscopic Modeling of Phase Inversion During Compounding," R. Ratnagiri and C.E. Scott, Polym. Engr. Sci., 41, 1310 (2001).
  • "Evolution of Structure in the Softening/Melting Regime of Miscible Polymer Mixing," H.E. Burch and C.E. Scott, Polym. Engr. Sci., 41, 1038 (2001).
  • "The Effect of Scaleup on the Processing Behavior of a Blend Exhibiting Phase Inversion During Compounding," R. Ratnagiri, C.E. Scott, and C.-K. Shih, Polym. Engr. Sci., 41, 1019 (2001).
  • "Effect of Viscosity Ratio on Structure Evolution in Miscible Polymer Blends," H.E. Burch and C.E. Scott, Polymer, 42, 7313 (2001).
  • "Morphology Development During Phase Inversion in Isothermal, Model Experiments: Steady Simple Shear and Quiescent Flow Fields," N.D.B. Lazo and C.E. Scott, Polymer, 42, 4219 (2001).
  • "Effects of Rheological Properties and Processing Parameters on ABS Thermoforming," J.K. Lee, T.L. Virkler, and C.E. Scott, Polym. Engr. Sci., 41, 240 (2001).
  • "Simulations of a Cusped Bubble Rising in a Viscoelastic Fluid with a New Numerical Method," A. Wagner, L. Giraud, C.E. Scott J. Comp. Phys. Comm., 129, 227 (2000).
  • "Initial Mechanisms of Dispersion of Core Shell Impact Modifiers in a Polymer Matrix," C. E. Scott and L.D. Rockford,J. Vinyl Additive Tech., 5, 125 (1999).
  • "Rheology of ABS Polymer Melts and Viscoelastic Constitutive Models," S. Solovyov, T.L. Virkler, and C.E. Scott, J. Rheol., 43, 977 (1999).
  • "Morphology Development During Phase Inversion of a PS/PE Blend in Isothermal, Steady Shear Flow," N. Lazo and C.E. Scott, Polymer, 40, 5469 (1999).
  • "Effect of Viscosity Variation with Temperature on the Compounding Behavior of Immiscible Blends," R. Ratnagiri and C.E. Scott, Polym. Engr. Sci., 39, 1823 (1999).
  • "Phase Inversion During Compounding with a Low Melting Major Component: Polycaprolactone/Polyethylene Blend," R. Ratnagiri and C.E. Scott, Polym. Engr. Sci., 38, 1751 (1998).
  • "Viscosity Ratio Effects in the Compounding of Low Viscosity, Immiscible Fluids into Polymeric Matrices," C.E. Scott, S.K. Joung, Polym. Engr. Sci., 36, 1666 (1996).
  • "Processing and Morphology of Polystyrene/Ethylene-Propylene Rubber Reactive and Nonreactive Blends," C.E. Scott and C.W. Macosko, Polym. Engr. Sci., 35, 1938 (1995).
  • "Compounding and Morphology of Nylon/Ethylene-Propylene Rubber Reactive and Nonreactive Blends," C.E. Scott and C.W. Macosko, Int. Polym. Processing, 10, 36 (1995).
  • "Morphology Development During the Initial Stages of Polymer-Polymer Blending," C.E. Scott and C.W. Macosko, Polymer , 36, 461 (1995).
  • "Morphology Development During Reactive and Nonreactive Blending of an Ethylene-Propylene Rubber with Two Thermoplastic Matrices," C.E. Scott and C.W. Macosko, Polymer, 35, 5422 (1994).
  • "Model Experiments for the Interfacial Reaction Between Polymers During Reactive Polymer Blending," C.E. Scott and C.W. Macosko, J. Polym. Sci., Polym. Physics, 32, 205 (1994).
  • "Morphology Development in Polymer Blends," C.W. Macosko, C.E. Scott, and U. Sundararaj, Seikei Kakou,5, 571 (1993).
  • "The Recirculating Screw Mixer: A New Small-Volume Intensive Mixer for the Polymer Laboratory," C.E. Scott and C.W. Macosko, Polym. Engr. Sci., 33, 1065 (1993).
  • "Rubber-Filler Interaction Effects on the Solid State Dynamic Mechanical Properties of Polyethylene/EPDM/Calcium Carbonate Composites," C. Scott, H. Ishida, and F.H.J. Maurer, Polym. Composites, 13, 237 (1992).
  • "Model Experiments Concerning Morphology Development During the Initial Stages of Polymer Blending," C.E. Scott and C.W. Macosko, Polymer Bulletin, 26, 341 (1991).
  • "Characterization of Polyethylene/EPDM/Silicon Dioxide Multicomponent Composites by Solid State Dynamic Mechanical Spectroscopy," C. Scott, H. Ishida, and F.H.J. Maurer, J. Mater. Sci., 26, 5708 (1991).
  • "Melt State Dynamic Mechanical Properties of Polyethylene/EPDM/Silicon Dioxide Composites," C. Scott, H. Ishida, and F.H.J. Maurer, J. Reinf. Plast. Comp., 10, 463 (1991).
  • "Interfacial Effects on the Melt State Behavior of Polyethylene/EPDM/Calcium Carbonate Composites," C. Scott, H. Ishida, and F.H.J. Maurer, Rheol. Acta., 27, 273 (1988).
  • "Infrared Analysis and Izod Impact Testing of Multicomponent Polymer Composites: Polyethylene/EPDM/Filler Systems," C. Scott, H. Ishida, and F.H.J. Maurer, J. Mater. Sci., 22, 3963 (1987).
  • "Fast Polymerization and Crystallization Studies of Nylon 6 by Combined use of Micro-RIM Machine and FT-IR," H. Ishida and C. Scott, J. Polym. Engr., 6, 201 (1986).

Caution: The information on this web site may be unreliable, misleading, out-of-date, or just plain wrong.
PolymerProcessing.com accepts no liability for use or misuse of the information contained herein.
Polymer processing operations often present numerous safety hazards.
You should obtain advice from an experienced professional or consultant.
SITE MAP THE EDITOR

Copyright 2000-2003 PolymerProcessing.com